HKB

← back

James Nasmyth, Engineer: An Autobiography

James Nasmyth · 1883-1885 (composition of the autobiographical recollections; published in 1885) primary

passage 111 of 273 · CHAPTER 1 My Ancestry > CHAPTER 10. Begin Business at Manchester (1/17)

Mr. Maudslay arrived from Berlin two days after my return to London. He, too, had enjoyed his holiday. During his stay in Berlin he had made the friendship of the distinguished Humboldt. Shenkel, the architect, had been very kind to him, and presented him with a set of drawings and engravings of his great architectural works, which Mr. Maudslay exhibited to me with much delight. What he most admired in Shenkel was the great range of his talent in all matters of design, his minute attention to detail, and his fine artistic feeling.

Soon after Mr. Maudslay's return, a very interesting job was brought to him, in which he took even more than his usual interest. It was a machine which his friend Mr. Barton, of the Royal Mint, had obtained from France. It was intended to cut or engrave the steel dies used for stamping coin. It was a remarkable and interesting specimen of inventive ingenuity. It copied any object in relief which had been cast in plaster of Paris or brass from the artist's original wax model. The minutest detail was transferred to soft steel dies with absolute accuracy. This remarkable machine could copy and cut steel dies either in intaglio or in cameo of any size, and, in short, enabled the mechanic who managed it to transfer the most minute and characteristic touches of the original model to the steel dies for any variety of size of coin. Nevertheless, the execution of some of the details of the machine were so defective, that after giving the most tempting proof of its capabilities at the Royal Mint, Mr. Barton found it absolutely necessary to place it in Maudslay's hands, in order to have its details thoroughly overhauled, and made as mechanically perfect as its design and intention merited.

This interesting machine was accordingly brought to the private workshop, and placed in the hands of the leading mechanic, whom I had the pleasure of being associated with, James Sherriff, one of our most skilled workmen. We were both put to our mettle. It was a job quite to my taste, and being associated with so skilled a workman as Sherriff, and in constant communication with Mr. Maudslay, I had every opportunity of bringing my best manipulative ability into action and use while perfecting this beautiful machine. It is sufficient to say that by our united efforts, by the technical details suggested by Mr. Maudslay and carried out by us, and by the practical trials made under the superintendence of Mr. Wyon of the Mint, the apparatus was at length made perfect and performed its duty to the satisfaction of every one concerned.

← previous passage read in the full work → next passage →
James Nasmyth, Engineer: An Autobiography · James Nasmyth · 1883–1885